Capacitor Value Calculator

Calculate capacitance, reactance, charge, energy, and decode capacitor color codes.

Formulas:

Capacitive Reactance: Xc = 1 / (2π × f × C)

Charge: Q = C × V

Energy: E = ½ × C × V²

Series: 1/Ct = 1/C1 + 1/C2 + 1/C3...

Parallel: Ct = C1 + C2 + C3...

Where Xc = Reactance (Ω), f = Frequency (Hz), C = Capacitance (F), V = Voltage (V), Q = Charge (C), E = Energy (J)
Common Capacitor Values:
  • • Ceramic: 1pF - 1μF
  • • Electrolytic: 1μF - 10,000μF
  • • Tantalum: 0.1μF - 1000μF
  • • Film: 1nF - 10μF
  • • Power Supply Filter: 100μF - 1000μF
  • • Decoupling: 0.1μF (100nF)
  • • Audio Coupling: 1μF - 100μF
  • • Timing: 1nF - 100μF
Example Calculations:

Example 1: 100μF capacitor at 50Hz

Reactance: Xc = 1/(2π × 50 × 0.0001) = 31.83Ω

Example 2: 470μF capacitor charged to 12V

Charge: Q = 470×10⁻⁶ × 12 = 5.64mC | Energy: E = ½ × 470×10⁻⁶ × 12² = 33.84mJ

Example 3: Two 100μF capacitors in series

Total: 1/Ct = 1/100 + 1/100 → Ct = 50μF

Search Tools

Copied!

How to calculate capacitor values

Select the calculation mode, enter the known capacitance, frequency, voltage, or charge values, and choose the matching units. The calculator can help with capacitive reactance, charge, stored energy, and series or parallel combinations.

Important capacitor relationships

Capacitive reactance decreases as frequency or capacitance increases. Stored charge follows Q = C × V, while stored energy follows E = ½ × C × V². For series capacitors, total capacitance is lower than the smallest individual value; for parallel capacitors, the values add together.

Before using the result

Check voltage ratings, polarity for electrolytic capacitors, tolerance, and the units shown in the result. Use the calculated value as an engineering reference and verify the final component choice against the circuit requirements.

© 2026 Universal Converter. All rights reserved.

Developed By Bahlool Hanif

Accurate conversion for everyone, everywhere.